Idiomas disponibles
Idiomas disponibles
5 LED function
Switching on
Switching off
Pairing
Standby
Incoming call
Low battery status
Charging
6 Getting started
Remove the headset from the packing and charge it fully before using
it for the first time. To do this, connect the provided charging cable to
the headset. The charging socket is located below the right bracket. For
example, a computer or a USB charging adapter can be used for charging.
The battery is fully charged once the LED indicator changes from red to
blue. Always disconnect the headset from the power source after charg-
ing it to prevent constant recharging. It is advisable to use the headset
regularly to maintain the full performance of the integrated batteries.
The 3.5 mm jack can be used when the headset is switched-on as well
18
Blue LED flashes 2 times
Red LED flashes 2 times
Red and blue LEDs flash alternately
Blue LED flashes 3 times in 5 seconds
Blue LED glows continuously
Red LED flashes 2 times every 2 seconds
Red LED glows continuously If the device is
fully charged, then the blue LED flashed once.
English
