C L E A N I N G / M A I N T E N A N C E
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap and water solution.
2. NEVER use abrasive or flammable solvents to clean
the unit.
3. After cleaning, be sure to completely dry the unit
with a cloth or towel.
4. Store heater in a cool, dry location.
5. It is recommended that you store the unit in its
original carton.
AUTO SAFETY SHUT-OFF
This heater is equipped with a patented, technologically-
advanced, safety system that requires the user to reset
the heater if there is a potential overheat situation. When
a potential overheat temperature is reached, the system
will automatically shut the heater off. It can only resume
operation when the user resets the unit.
RESET INSTRUCTIONS
If your heater shuts down:
1) Unplug the unit and wait 30 minutes.
2) Plug in and operate normally.
TIP-OVER SHUT OFF:
When the unit is accidentally knocked over, it will instantly
shut off. The unit may also shut off if it is moved or
bumped. To reset, place the heater in an upright position,
press the Power Button ( ) and press the MODE Button
to select the desired heat setting, and heater will resume
operation.
T R O U B L E S H O O T I N G
TROUBLESHOOTING
If your heater fails to operate:
• The temperature may be set too low. Adjust the
thermostat until heater restarts or press the MODE
Button to either HI or LO setting for constant heat.
• Turn the heater OFF and UNPLUG THE HEATER.
• Make sure the electrical outlet or circuit breaker is
working.
• Check for obstructions. If you find an obstruction turn
the heater OFF, and unplug the unit. Carefully
remove the obstruction and follow the reset
instructions.
Please DO NOT attempt to open or repair the
heater.
If you have any questions regarding your product or
would like to learn more about other Holmes
please contact our Consumer Service Department at
1-800-546-5637 or visit our website at
www.holmesproducts.com.
products,
®