Asist AE6V200E Instrucciones De Uso página 34

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
additiOnaL safEty instrUctiOns
Failure to follow the instructions below may result in
electric shock, fire and / or serious injury.
Keep all safety instructions and instructions
for future use.
! - This symbol indicates the risk of injury or damage
to the device.
The appliance is intended for use by children over 8
years of age and persons with reduced mental, sen-
sory or mental capabilities, or lack of experience and /
or knowledge only if they are supervised or instructed
in the safe use of the device and if they understand
the dangers involved.
Children must not play with the appliance.
Children must not clean or maintain the appliance
without supervision.
WARNING: Turn off the device when not in use.
Risk of fire due to incorrect use.
Be careful when using the device near flammable
materials. Do not measure the hot air stream for a
long time to the same place.
Do not use the device in hazardous areas
explosion.
Do not use the device in rooms where it may be
highly flammable material or gas.
Heat can lead to flammable material
covered.
Do not leave the device switched on unattended.
Do not use the device outdoors in the rain.
Never cover the nozzle.
Do not direct the hot air stream at others
persons.
Do not use the device as a hair dryer !!!
After use, allow the device to cool before storing.
Keep all parts of the body at a safe distance from
heating element and heat shield (including nozzle).
Do not touch hot surfaces before before they cool
completely.
Carry the appliance by the handle after the heat
shield (including the nozzle) has cooled down.
Only keep this electrical device insulated
gripping surfaces because the heat shield (including
nozzle) may come in contact with hidden electrical
line or your own network cable.
Always keep the power cord at a safe distance from
machine nozzles.
Connecting cables or other flammable materials must
not come in contact with hot parts of the device.
Unsuitable extension cords can be dangerous. If an
extension cord is used, it must be suitable for outdoor
use and the joint must be dry and located above
ground. Here it is recommended to use a cable drum
that has a socket installed in at least 60 mm above
the ground.
Always switch off the appliance before removing it
from the fireplace sparks were prevented.
The device is used exclusively for weeding
growing up between pavement slabs, on cobblesto-
nes areas, on walls, in rows and on lawns during the
growing season.
In addition, the device can be used to ignite wood
coal in outdoor grills.
Observe the instructions for its use
and grill manufacturer's instructions.
This appliance is intended for private use only
households.
This device may only be used for its intended purpo-
se. At non-compliance with provisions of generally
applicable regulations and the provisions of this
manual cannot be made by the manufacturer
liable for damages.
In the event of an accident, seek appropriate first aid
and seek qualified medical attention as soon as po-
ssible. Protect the injured person from further injuries
and calm him down.
Do not use the device in hazardous areas
explosion. Do not use the device in rooms where the-
re may be a flammable material or gas. Do not direct
the hot air stream at other people.
! Attention. During operation, the PLEVELE HOT AIR
LIQUIDATOR reaches a temperature of 80-650 ° C
without such a high temperature visibly manifesting
itself.
! Watch out for hot air, it can cause burns.
! Do not touch the muzzle of the pistol during operati-
on, you could get burned.
! If handled carelessly, there is a risk of fire.
Wear protective gloves. Wear safety goggles.
Always remove the mains plug from the mains during
work breaks, before carrying out any work on the
device (eg before changing the transfer nozzle) and
when not in use.
Keep the nozzle outlet at a sufficient distance from
the workpiece or machined surface. Air accumulation
may cause the device to overheat.
The device must always be clean, dry and free of oil
and grease.
Never use the device in a way that is contrary to the
purpose of use.
Operation is only permitted with a residual current
device (RCD max. Fault current 30mA). Only connect
to a single-phase AC mains with the voltage indicated
on the rating plate.
dEscriptiOn ( A )
1. Hot air nozzle
2. Support
3. Upper handle
4. Lock button
5. Lower handle
6. Power switch
7. Weed firing nozzle
8. Electric cable
pictograms
Pictograms on the product packaging:
34
loading