CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
The DVD player has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then
press the
/
buttons to select the desired audio
language.
The audio language can be changed if multiple lan-
guages are recorded on the DVD being played.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO
For audio CDs
Press the AUDIO button during playback.
Pressing the
/
buttons cycles the sound mode
through STEREO, L-CH and R-CH.
AUDIO S T E R E O
AUDIO
R - C H
AUDIO
L - C H
SETTINGS
DVD
CD
Bon jour
Both right and left channels
are active (stereo).
Only the right channel is active.
Only the left channel is active.
- 18 -
Notes
Pressing the
/
buttons may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to the
manual accompanying the disc.
If a desired language is not shown after pressing the
/
buttons several times, the disc does not have an
audio source in that language.
The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is not
available on a disc, a language defined by the disc is
selected.
The screen display will disappear after about 15 sec-
onds.
If you use DIGITAL AUDIO OUT jack, the sound
mode of audio CDs can not be changed.
EN
9F21
