Idiomas disponibles
Idiomas disponibles
Wall
Nut and Washers
Metal Bracket
Long Screw
Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit.
19. Adjust the pre-attached Floor Levelers at the bottom of console to level the unit as shown.
20. Carefully move the console and position it at the desired location against a wall. Now, follow the
instructions printed on the plastic bag containing Tipping Restraint Hardware to mount the Tip-over
Restraint to the console and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
21. The console is now ready for use.
Assembly Instructions
Wooden Stud
17
Wall
Floor Leveler
