Hoover HOZP717IN/E Instrucciones De Uso página 2

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Safety Indications
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect, wait
10-15 minutes after turning on the power before putting food inside the
oven. ln any case, the condensation disappears when the oven reaches
the cooking temperature.
• Cook the vegetables in a container with a lid instead of an open tray.
• Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
• WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
• WARNING: the accessible parts can become hot when the grill is in use.
Children should be kept at a safe distance.
• WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.
• WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not be
powered by an external switching device, such as a timer, or be
connected to a circuit that is regularly switched on and off.
• Children under 8 should be kept at a safe distance from the appliance if
not continuously supervised.
• Children should not play with the appliance.
• The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with instruction
as to the operation of the appliance, in a safe way with awareness of the
possible risks.
• Cleaning and maintenance should not be carried out by unsupervised
children.
• Do not use rough or abrasive materials or sharp metal scrapers to clean
the oven door glasses, as they can scratch the surface and cause the glass
to shatter.
• The oven must be switched off before removing the removable parts.
After cleaning, reassemble them according the instructions.
EN 02
loading