Idiomas disponibles
Idiomas disponibles
Tools Needed:
203 mm (8")
or 254 mm (10")
Pipe Wrench
Torx T-20
Security
†
Screwdriver or Bit
Level
Caulk Gun and Caulk
(for installing new exhaust vent)
Flashlight (optional)
Parts Supplied:
Foot Boots (4)
NOTE: The circuit diagram for this dryer is located inside
the lower front panel, within the Tech Sheets.
Technical Specifications:
220 – 240 V, 50 Hz. AC
4575W
Total mass: 68 kg max.
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few of
the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a minimum
threshold for dry volume capacity that is needed for import
tariff purposes.
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.
TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
†
203 mm (8") or 254 mm (10")
Adjustable Wrench
(that opens to 25 mm (1"))
25 mm (1") Hex-Head
Socket Wrench
Utility Knife
Vent Clamps
25 mm (1")
Open-End Wrenches
Leveling Legs (4)
Flat-Blade Screwdriver
8 mm (5⁄ 16") Socket Wrench
6 mm (1/4") Nut Driver
Pipe-Joint Compound
Suitable for Gas Type
Ruler or Measuring Tape
Security Cone
SPECIFICATIONS
Dry Linen Capacity
10.5 kg (23 lb)
IEC Capacity
9.0 kg (20 lb)
Sound Level
LpA: 58 dB(A) (Kpa+/-10 dB(A))
TOOLS & PARTS
Phillips Screwdriver
Pliers (that open to
39 mm [1
/
"])
9
16
686 mm (27")
Wood Block
Putty Knife
5/16" Hex Head – 18 x 2
Security Bolt
1
⁄
"
2
7
