Klarstein DryFy Connect 30 Manual De Instrucciones página 29

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Note: The drain line should not be too long (a length of less than 60 cm is
recommended). The end of the drain line should be in a lower position than the water
outlet (at least 10 cm lower), otherwise there is a risk of leakage.
When the pump function is activated:
Before the start
Filter frame
• Before switching on the appliance,
remove the filter frame and insert the
activated carbon filter (clean and dry
the filter and filter frame regularly).
• Do not turn on the unit until the filter
frame and filter have been inserted
correctly.
Determine the position of the drain
plug and remove it. Connect a drain
pipe with a diameter of 5 mm.
Note: Connect the drain line before
activating the pump function to prevent
the floor from getting wet.
Active carbon filter
EN
29
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dryfy connect 40Dryfy connect 50100344331003443410034435

Tabla de contenido