Proper Use - Kostal PIKO BA Instrucciones De Uso

Ocultar thumbs Ver también para PIKO BA:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24

Proper use

The PIKO BA Sensor is used to record the self-consumption of the building or the
power fed into the grid, and to represent it in the solar portal.
In addition to this, the sensor can also be used with smaller systems up to 30 kW
for which a permanent reduction, for example, of 70% has been set as an affordable
alternative to the ripple control receiver.
In combination with the inverter, the sensor can carry out dynamic self-consumption
regulation, and thus optimally distribute the generated energy.
Product features of the PIKO BA Sensor:
Registration of building consumption with analogue current measurement
n
Easy installation due to assembly on top-hat rail according to EN 60715
n
Control of inverter output according to the principle of dynamic active power
n
control.
The PIKO BA Sensor may only be used in combination with a PIKO inverter.
The device may only be used in grid-connected photovoltaic systems within the
permissible power range. The device is not intended for mobile use.
Inappropriate use can be hazardous and lead to injury or even death to the user or
third parties. Material damage to the device and other equipment can also occur.
The current sensor may therefore only be used for its intended purpose.
Please also read the operating manual of the inverter carefully and observe the safety
instructions found there.
20
Technical data
PIKO BA Sensor (MBS ASRD 14)
Rated current, primary (Peak/RMS)
Rated current, secondary
Ext. current sensor transmission ratio
Accuracy class
Connected power PIKO BA
Connected power PIKO 4.2-8.5
Connected power PIKO 10-20
Dimensions (H x W x D)
Max. line diameter
Installation on top-hat rail according to EN 60715
IMPORTANT INFORMATION
To record building consumption, the PIKO BA Sensor needs PV or
battery energy. If the PV energy generated is lower than U
the battery voltage is too low, building consumption can no longer
be recorded.
Unit
A
50/35
A
1
50:1
1
kW
14
kW
27
kW
34.5
90 x 105 x 54
mm (inch)
(3.54 x 4.13 x 2.13)
mm (inch)
13.5 (0.53)
H
or
DCstart
DE
EN
FR
ES
PL
PT
IT
DK
NL
GR
TR
21
Tabla de contenido
loading

Este manual también es adecuado para:

Mbs asrd 14

Tabla de contenido