Section 3 - mydlink
1
Device Name
2
Privacy Mode
3
Motion Settings
4
Storage
5
Camera Microphone
6
Night Vision
7
Anti-Flicker
8
Invert Image
9
Status LED
10
Designated Contact
11
Wi-Fi
12
Time Zone
13
Firmware
14
MAC ID
15
Restart Device
16
Remove Device
D-Link DCS-6100LHV2 User Manual
Tap to change the device's name.
Tap to enable. Privacy mode will disable the camera feed.
Tap to set the Motion area and sensitivity settings.
Tap to change the video clips storage location from the microSD card to the
cloud. You can also subscribe to mydlink Cloud from here and view your
current subscription plan.
Tap to enable or disable picking up sound near your camera in live view
and recordings.
Tap to change night vision detection to On, Off or Auto.
Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the frequency
of your lights.
Enable this to invert the camera view.
Disabling this will turn off the LED until you turn it back on.
Tap here to add, remove, or edit designated contacts that appear in the
rich notification.
This displays the current wireless network. Note: Tap Remove Device
or press the reset button if you want to change wireless networks.
Select the time zone to calibrate your device to.
This displays the installed version of the firmware on your device. Tap to enter
the update settings. You can choose the most suitable time for automatic
updates.
Identifies the device for support issues.
Tap this button to restart the device.
Tap this button to disconnect this device from your mydlink account.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
14
