Idiomas disponibles
Idiomas disponibles
24 Fail Over Mode (Command: m i)
► Selects the Fail Over mode.
Transmission
(m)(i)( )([Set ID])( )([Data])(Cr)
[Data] 00: Off
[Data] 01: Auto
[Data] 02: Manual
Ack
(i)( )([Set ID])( )(OK/NG)([Data])(x)
25 Fail Over Input Select (Command: m j)
► Selects an input source for fail over. (This feature is
only available when Fail Over is set to Custom.)
Transmission
(m)(j)( )([Set ID])( )([Data]1)( )([Data]2)( )([Data]3)( )
([Data]4)...( )([Data]N)(Cr)
[Data] 1-N (Input priority 1-N)
[Data] 20: AV1
[Data] 21: AV2
[Data] 22: AV3
[Data] 90: HDMI1
[Data] 91: HDMI2
[Data] 92: HDMI3
[Data] 93: HDMI4
Ack
(j)( )([Set ID])( )(OK/NG)([Data]1)([Data]2)([Data]3)
([Data]4)...([Data]N)(x)
* Some input signals may not be available for all
models.
* The data number (N) may vary depending on the
model. (The data number depends on the number
of supported input signals.)
34
26 Internal storage media contents play (Command:
s n, a8)
► Plays media stored in the internal memory.
► This command may work differently Depending
upon model and signal.
Transmission
(s)(n)( )([Set ID])( )(a)(8)( )([Data])(Cr)
[Data] 01: media contents play
Acknowledgement
(n)( )([Set ID])( )(OK/NG)(a)(8)( )([Data])(x)
* Real data mapping
00:
Step 0
A:
Step 10 (Set ID 10)
F:
Step 15 (Set ID 15)
10:
Step 16 (Set ID 16)
64:
Step 100
6E:
Step 110
73:
Step 115
74:
Step 116
CF:
Step 199
FE:
Step 254
FF:
Step 255
