Idiomas disponibles
Idiomas disponibles
aSSeMbly InStRUCtIOnS
Assembly Instructions
This log splitter is partially assembled at the factory . Please refer to the drawings and parts list should it become necessary
to disassemble the unit for repair or replacement of parts . The drawings in this manual are for reference only . Some of the
components on your log splitter may look slightly different .
CaUtIOn: To avoid personal injury, always get help when moving or
assembling heavier components such as a beam .
Tools Required
1/4" wide flat head
screwdriver
Hammer
10 mm wrench
13 mm wrench
Step 1:
1a:
Remove the top and sides by bending open all the metal side locks . Use caution as shifting may have occurred .
1b:
Remove loose items from the crate and set aside .
1c:
Cut all hold down straps and inspect each part for damage .
1d:
Take note that the following items are included in the crate:
Description
Beam Assembly
Tank Assembly
Motor/Pump Assembly
Pressure Hoses
Note: If any part is damaged, contact your dealer or delivering carrier .
16
18mm wrench
19mm wrench
10 mm Hex wrench (included)
Needle-nose pliers
Box cutter
Quantity
1
1
1
2
Description
Wheel Assemblies
Log Catcher
Hardware Kit
Manual Canister
1
3
Quantity
2
1
1
1
2
4
