Using An Ac Adapter; Cable Connection - Microlife PR 1KA1 Instrucciones De Uso

3.2. Using an AC adapter

It is possible to operate this printer
through the Microlife AC adapter
(output 6V DC / 600mA with DIN plug). Make
certain that you use an AC adapter which
fulfills the legal requirements.
(CE sign on the type plate).
a) Plug the DIN plug into the socket at the
left back of the instrument.
b) Plug the AC adapter into a 110V power
socket. Test that power is available by
sliding the 0/I (on/off) switch.
Note:
• No power is taken from the batteries while the AC adapter is connected to the
instrument.
• If the power is interrupted during the measurement (e.g. by removal of the AC
adapter from the socket), the instrument must be reset by removing the DIN plug
from its socket.
• Please consult Microlife if you have questions relating to the AC adapter.

3.3. Cable connection

Insert one end of the cable into the printer
port socket (right backside of the
instrument) as shown in the diagram.
Note:
• Connect the other end with the monitor
or asthma monitor (both connectors are
identical).
4
AC/DC adapter
socket
Printer port
socket