D-Link DCS-8526LH Manual Del Usuario página 14

Section 2 - Installation
1
Place the mounting bracket at the desired location, ensuring that
/
the location of the power cord thread is also at the desired location.
Use a pencil to mark the holes.
2
Use a 6 mm drill bit to drill two 26 mm deep holes over the pencil
/
marks. Hammer in the plastic wall anchors to support the screws.
3
Align the mount over the holes. Use the supplied screws to attach
/
the mount to the surface of the wall.
D-Link DCS-8526LH User Manual
Mounting the Camera
11