Idiomas disponibles
Idiomas disponibles
Time delay before automatic operation
•
When the timer function dial in the "RUN" position (i.e. settings saved, timer
active), pressing the button activating the time delay before the automatic
program starts will postpone the start of the automatic operation schedule of the
device by 0-24-48-72 hours (depending on the number of times button is
pressed). During this time, the display will alternate between the clock and the
time remaining until the automatic operation is scheduled to begin.
To deactivate the time delay to start automatic operation, first turn the timer
knob to OFF, and then turn it to RUN.
3.3.2
Manual control
The manual control mode is one-time, continuous watering without interfering
with the (saved) automatic work schedule.
To enter manual control, press the manual control activation/deactivation
button, and then the value increase or decrease button (+/-) to set the watering
duration from 0-240 minutes. Then, press the valve selection button (L/R). If
there is no further response from the user, the manual watering mode will start
in 5 seconds. During this time, the display will alternately show the clock and the
time remaining until the automatic operation is resumed.
