Idiomas disponibles
Idiomas disponibles
Tripod Fan Use instructions
PRODUCT AND ACCESSORIES Fig.A
1. Telescopic tube
2. Adjust high nut
3. Legs holder
4. Legs
5. Rubber feet
6. Motor
7. Grid locking hooks
8. Blade
9. Front and back grid
10. Swing on/off button
11. Adjust inclination knob
FAN ASSEMBLY Fig.B
1. Insert and screw the legs in the legs holder.
2. Adjust the high of the telescopic tube
3. Insert the motor on the telescopic tube and fix it with the appropriate screws.
4. Place the back grid in the housing and secure it with the 4 screws.
5. Place the blade and secure it with the appropriate screw.
6. Place the front grid and secure it with the screw and the locking hooks.
Important: Firmly weld all components and assure that the legs will be open completely, to ensure good
stability of the fan, otherwise it could oscillate dangerously.
SPEED SELECTION
Choose the speed desired pressing on the buttons of the control panels.
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
HEAD INCLINATION
It is possible to choose various positions and change the air flow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the adjust inclination knob and change the inclination of the fan as desired and
screw the knob strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
SWING
It is possible to activate or disconnect the swing of the fan, by touching appropriate button. Swing allow to provide
the air uniformly.
To activate the swing push the button down until completely blocked ; the head fan turns automatically from right
to left.
To disconnect the swing raise the button completely.
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
Do not allow water or other liquids to penetrate in the fan, in order to protect it.
After cleaning, dry every parts before using the appliance.
During the winter and when not used, keep this appliance in a dry and clean place.
10
