Technical Specifications; Safety Instructions - Defort DSP-402N Instrucciones De Servicio

English
GB
Submersible pump
for clean water
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others, please
read these instructions carefully before using this appli-
ance. Keep in a safe place for future reference.
Warning!
Always read the instruction for electrical products care-
fully before use.
It will help you understand your product more easily
and avoid unnecessary risks.
Keep this instruction manual in a safe place for future
use.

TECHNICAL SPECIFICATIONS

Float Switch
Voltage
Input power
Max. Pumping Capacity
Max. Pumping Height
Max. Depth for unit
Max. Particle size
Hose Connection
Power Cable length
Maximum water temp.
Weight
FEATURES
1. Carry handle
2. Float ON/OFF switch
3. Base
4. Main motor housing
5. Universal connector
6. Power cable

Safety Instructions

● This pump is not to be used to pump drinking water.
● This pump is not to be used to pump combustible,
gaseous or explosive fl uids.
● Dispose of plastic bags safely - they are a suffocation
hazard for young children.
● Please read these instructions carefully and tho-
roughly before using this appliance and keep them
for future reference. It is very important that you
under stand how to use this appliance safely so
please take the time to familiarize yourself with
the requirements as outlined in these instructions.
● If you are in any doubt what so ever about using this
appliance, we strongly recommend that you employ
the services of a suitably qualifi ed person.
● Electrical connection must be protected by a resid-
ual current device (RCD) at the power socket with a
nominal trip current of 30mA (max).
● Keep children and pets well away from the work area
and never allow children to use this appliance or
touch the extension cord at any time. When not in
use, keep this appliance stored in a safe place out
of reach of children.
● Never leave the appliance unattended when in use.
● Never pull the appliance by its power cord. Carry it
using the carry handle.
● Do not allow the power cord to lay on or across
sharp objects that might pierce the outer insulation.
Carry out a visual inspection of the power cord be-
fore use and if it is damaged, have it replaced by a
specialist service centre. Do not use the appliance
if the cord is damaged.
+ ● Keep the power cord away from heat, frost, oil, sol-
vents or any sharp objects or edges.
230 V/50 Hz
● Electrical connections e.g. extension cable, must
400 W
be protected from moisture at all times.
10000 l/h
● Check that the power rating on your appliance cor-
6,5 m
responds with the power rating at you mains supply.
The supply voltage must be 230-240 V.
8 m
35 mm ● Never run this appliance dry-out of the water. If the
appliance overheats, the thermal cut-out will switch
1", 1 1/4", 1 1/2"
it off. If this happens wait 5 minutes before using
10 m
the appliance again.
35°C
● Always have the appliance switched off and the
plug removed from the power socket before placing
4,3 kg
it in or removing it from the water. Only switch the
power back on with dry hands.
● Never use this appliance in a pond or swimming
pool while people are present-in the water!
Electrical Information (only for the UK)
The wires of this appliance are coloured in accordance
with the following code:
Brown: Live (L) or Red
Blue: Neutral (N) or Black
Green and Yellow or Green: Earth (E) (symbol here).
● This appliance must be earthed
● 3 pin plugs must comply to BS/3 63
● Fuse must be 5 amp and comply to BSI362
If the plug needs replacing, the new plug must be wired
in accordance with the following instructions:
Connect the Blue wire to the terminal marked NEU-
TRAL (N). Connect the Brown wire to the terminal mar-
ked LIVE (L). Connect the Green and Yellow wire to the
terminal marked EARTH (E) (symbol here).
GB
5