Idiomas disponibles
Idiomas disponibles
Operation
The appliance is intended only for domestic use, not for professional use.
Operation
1. Spout
2. Top lid
3. Lid release button
4. Handle
5. On/off switch button with light
6. Water level indicator
7. Power cord and plug
Before use for the first time
Before first use, remove possible manufacturing process residues by boiling 3
full kettles of water. Dispose this water.
Tip: You can use vinegar or special descaling agents for the first time.
Use
1. Turn the jug so that the spout faces away from you.
2. Press the button to open the lid (3).
3. Fill the jug with the required quantity of water (at least 0.5 litres, and a
maximum of 1,7 litres). Never fill the water boiler over the "max". Otherwise
the hot water can spatter out of the base.
ATTENTION
Make sure that you do not spill any water on the base.
4. Release the button to open the lid.
5. Place the jug on the base, and insert the plug in the wall socket. Push down
the on/off switch. The on/off pilot light will illuminate.
6. The jug kettle is now switched on, and the water will now begin to heat. The
jug kettle switches off automatically a few seconds after the water has come
to the boil. The on/off pilot light will now extinguish.
7. Remove the jug from the base by the handle, and pour the water out.
10
