Screen Research FCIN1 Manual De Instalación página 20

Manual
- 1 Manual
- Alluminium profile CINEMA (the number depends on the screen dimensions)
- Iron corner for alluminium profile and stiffeners (the number depends on the screen dimensions)
- Joint for alluminium profile and stiffeners (the number depends on the screen dimensions)
- Nuts and screws M8 (the number depends on the screen dimensions)
- Wall Mount Brakets (the number depends on the screen dimensions)
- Elastics Stretcher (the number depends on the screen dimensions)
- 1 Fabric
(screws and plugs for wall mount are not included)
1
Assembly the TOP horizontal profile.
1- Insert in the profile the nuts and the screws for fix the brackets for stiffeners. (10 screws/10 nuts for each
stiffeners)
2- Take the horizontal profiles and place them close to each other.
3- Fix together the screws and the nuts, don't fasten them completely.
4- Insert the heads of the screws in the profile grooves and then fasten them completely.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: FCIN1 Installation Manual rev3 |07.01.2021
Page 20