Belkin OmniView PRO Serie Manual Del Usuario página 11

F1D116_OSD_AM_man.qxd 4/20/00
Hardware Installation
6.
Back view of OmniView
7.
Back view of OmniView
Back of OmniView
8.
Double check all of the connections. Make sure the keyboard and mouse cables go
to the correct ports.
9.
Repeat steps 5-7 for the remainder of the computers.
4:07 PM Page 9
Connect the first computer's mouse cable to the OmniView
PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port
on the computer, and the other end to the PC1 PS/2 mouse port on the back of
the OmniView ™ .
If using a serial mouse cable (Belkin Part# F2N209-XX-T), connect the female
end to a DB9 serial port on the computer, and the male end to the DB9
female end of F1D116xMSE combo mouse adapter. Then connect the PS/2
end of the combo mouse adapter to the PC1 PS/2 mouse port on the back of
the OmniView ™ .
PC16 PC15 PC14
SW
PC8 PC7 PC6
™ PRO
Connect the first computer's keyboard cable to the OmniView
another PS/2 cable (Belkin Part# F2N036–XX), connect one end to the PS/2
keyboard port on the computer, and the other end to the PC1 keyboard port on
the back of the OmniView ™
you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).
PC16 PC15 PC14
SW
PC8 PC7 PC6
™ PRO
™ PRO
(continued)
PC13 PC12 PC11 PC10 PC9
PC5 PC4 PC3 PC2 PC1
For PS/2 Mouse
F1D116xMSE
For Serial Mouse
F2N025-XX-T
PRO. If your computer has an AT-style keyboard port,
PC13 PC12 PC11 PC10 PC9
PC5 PC4 PC3 PC2 PC1
F2N036-06
9
™ PRO. If using a
Back of PC
Back of PC
F2N036-06
VGA MONITOR
RJ45 NETWORK
PRO. Using
™
Back of PC
Back of PC
VGA MONITOR
RJ45 NETWORK
En