Perel CFANFS45N Manual Del Usuario página 5

5. Operation
1. Install the fan on a dry, level and non-slippery surface.
2. Connect the fan to the mains.
3. Rotate the speed switch to the desired setting.
(0 = off, 1 = low, 2 = medium, 3 = high)
4. Switch off the fan and disconnect from the mains after use.
6. Tilting
1. Make sure to switch off the fan.
2. Slightly loosen the locking screw, tilt the fan to the desired angle and tighten the
locking screw.
3. Switch on the fan.
V. 02 – 16/01/2020
CFANFS45N
5 ©Velleman nv