HF-63X1 and HF-63X2 Specifications
Frequency Range:
Nominal Coverage:
DI:
Q:
SPL (peak):
Impedance:
Maximum Input Power:
(2 hours EIA 426B)
Sensitivity:
Crossover Frequency:
Connectors:
Transducers:
Mounting Hardware:
Size:
Weight:
(subject to change without notice)
1,300 - 16,000 Hz (-6 dB)
90° horizontal X +15 to -35° vertical (50° total, adjustable mount provides for vertical plane adjustments. The hori-
zontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts.
9.0 dB (600 to 16,000 Hertz average)
8.0 (600 to 16,000 Hertz average)
HF-63X1 with LF-3115: 123 dB
HF-63X2 with LF-3215: 126 dB
HF-63X1 with LF-3115: 8 Ohms nominal
HF-63X2 with LF-3215: 4 Ohms nominal
HF-63X1 with LF-3115: 150 W
HF-63X2 with LF-3215: 300 W
HF-63X1 with LF-3115: 95.0 dB
HF-63X2 with LF-3215: 97.5 dB
1,300 Hz
Barrier strip screw terminals accept up to #10 AWG stranded wire. Six terminals: Two full-range input terminals,
two HF OUT terminals (factory wired to compression driver), and two LF OUT terminals with factory supplied wiring
for connection to QSC LF-3115 or LF-3215 low frequency loudspeaker.
1.5" (38mm) exit, 2.5" (63.5mm) titanium diaphragm compression driver.
Attaches to top of the LF-3115 or LF-3215 low frequency cabinet using three 5/16"-18 x 3/4" long bolts.
30" wide X 16" high X 20" deep (762mm X 406mm X 508mm)
50 lbs. (shipping), 40 lbs. (net), 22.7/18.4 kilograms
3
