Arize Factor
ATTENTION: Before attempting to install units or maintenance, ensure power is off.
Wired Dimming Connections (Optional) 0-10v Dimming
NOTE: Arize Factor dimming allows user to adjust the light output from 0%/10-100%. When set to 0%, the system will
enter standby mode, consuming 0.5-1.5W and LEDs may remain very faintly lit. If 0 light is preferred, switch off the
unit via the mains (AC line).
1
3
Dimming
Switch
+ (0-10V)
- (0-10V)
2
4
Driver
Black
Pink
Blue
Violet
Gray
9
Installation Guide
