Idiomas disponibles
Idiomas disponibles
oPerAtion - general
The appliance is
intended only for
domestic use,
not for professional
use.
1. Spout
2. Lid
3. Jug
4. Lid release button
5. LED-display
6. - Button
7. + Button
8. On/off button
9. Handle
10. Water-level
indicator
11. Base
oPerAtion - Before use for the first time
When using the jug kettle for the first time boil three jugs of water, and dispose of the boiled water. This will
remove the last traces from the manufacturing process.
tip: You can use vinegar or special descaling agents for the first time.
oPerAtion - Boiling water
1. Turn the jug so that the spout (1) faces away from you.
2. Press the button to open the lid (4).
3. Fill the jug (3) with the required quantity of water (at least 0,6 litres, and a maximum of 1,7 litres).
Never fill the water boiler over the "max". Otherwise the hot water can spatter out of the base.
Make sure that you do not spill any water on the base.
4. Close the lid (2).
5. Place the jug on the base, and insert the plug in the wall socket. The LED-display (5) switches on and
displays the current water temperature. Press the on/off button (8). The default setting of the device is
100 °C.
6. Use the - and + buttons (6 and 7) to set the desired temperature. The kettle will start to heat the water
right away.
7. When then the set temperature is reached the kettle will stop heating and sound off with a signal.
Wanneer de gewenste temperatuur bereikt is, stopt de waterkoker met verwarmen en zal er een
8. Remove the jug from the base by the handle (9), and pour the water out.
Be carefull you do not contact the hot water. It can cause serious burning wounds.
9. Remove the plug from the wall socket when you have finished using the jug kettle.
1.
2.
3.
18
instruction manual
4.
9.
10.
11.
Figure 1
5.
6.
7.
8.
