Manuales relacionados para Truper TPN-876K-2
Resumen de contenidos para Truper TPN-876K-2
- Página 1 Manual Mini Die 1/4” Grinder Kit Chuck Applies for: Code Model 16887 TPN-876K-2 TPN-876K-2 Use oil continuously and WARNING dosed to lubricate the tool. Read this manual thoroughly CAUTION before using the tool.
- Página 2 Manual before using the tool. Parts Assembly Keep this manual for future references. Start up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Authorized service centers Warranty policy TPN-876K-2 ENGLISH...
- Página 3 Technical Data TPN-876K-2 Code 16887 Description Mini die grinder kit Air Input 1/4 NPT Chuck 1/4” Vibration Level < 2.5 m/s Noise Level 92 dB Free Speed 25 000 RPM Weight 0.69 lb Air Consumption 2.5 CFM Hose Minimum 3/8”...
- Página 4 General Safety Warnings for Pneumatic Tools Keep your work area clean, tidy and well lit. Wear adequate protective safety accessories. CAUTION CAUTION Cluttered and dark areas may cause accidents. Wear eye protection, dust mask, non-skid safety shoes, helmet and ear plugs. In normal conditions, the risk of Never use the tool in explosive areas or in the presence injury is reduced.
- Página 5 Risk Control When Using Pneumatic Tools Risk of injury in head and eyes To prevent head and eyes injuries WARNING • Compressed air out of pneumatic • Always, when operating pneumatic equipment wear equipment may be dangerous. Objects like brackets, burrs, protection glasses in compliance with the ANSI Z87.1 splinters, dust and other residues may be impelled towards Standard.
- Página 6 Risk Control When Using Pneumatic Tools Risk of injuries To prevent injuries WARNING • Damaged hoses may burst and cause • Do not abuse the hose or the connectors. serious injuries or deafness. • Keep the hose away from sharp or abrasive edges. •...
- Página 7 Parts 1/4” Chuck 1/8” Chuck Collet Handle Trigger Switch Regulating Screw Trigger Lever Air Input Fast Connector Mounting Wrenches Assembly Accesory Installation • Double check the accessory rod (A) is the same size as the installed chuck diameter (B). • Use only accessories specified for the grinder RPM or bigger.
- Página 8 Start Up Air intake connection Fast Connector • Connect the air hose to the tool using a female fast connector (A). When working with different pneumatic Intake tools and a single compressor, you can quickly connect Air Hose and disconnect tools exchange them easily. •...
- Página 9 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center.
- Página 10 . Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.