Remote Control; Connecting With Bt-Device; Replacing The Fuse - Power Dynamics PD908 Manual De Instrucciones

18. AUX Input
RCA and 3.5mm jack input for connecting audio units with line level output (e.g.
mixer, CD player, tape recorder).
19. Monitor Output
RCA connector with master signal, used for monitoring or record.

REMOTE CONTROL

1. On / Off
2. Stop
3. Mute
4. Mode
5. Repeat
6. Equalizer
7. Reverse
8. Forward
9. Play/Pause
10. Volume –
11. Volume +
12. Number keys

CONNECTING WITH BT-DEVICE

1.
2.
3.
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
Activate the BT-function on your device (Mobile phone, tablet etc.) which you want to play the
music. See the operating instructions for that device.
Press the "MODE" button and activate BT-function of soundbox.
Select "PD908" on your BT-device and make the BT-connection
5