INTRODUCTION
This BUCKET GREASE PUMP has features that
will make your work faster and easier. Safety,
comfort and reliability were provided as a prio-
rity for its design, making it easier to operate.
WARNING: Carefully read the manual be-
fore attempting to use this product. Be sure to
pay attention to all warnings and safety pre-
cautions throughout this manual.
GENERAL SAFETY RULES
WARNING: Read and understand all ins-
tructions. Failure to follow the instructions lis-
ted below may result in personal injury.
SAVE FOR FUTURE REFERENCE
AREA DE TRABAJO
• Keep your work area clean and well lit. Clut-
tered benches and dark areas invite accidents.
PERSONAL SAFETY
• Pump should be operated by trained person-
nel only
• Always wear Safety Goggles when using the
pump
• Always use Gloves when using the pump
• Do not point the discharge end towards your-
self or anyone as there is potential hazard for
injection into skin / eyes
• Never allow any part of the body to come in
contact with the operating fluid
• Before operating the pump , check hose for
signs of wear , leaks or loose connections. If
hose is weak , worn or damaged, replace the
hose immediately
• Incase of an accident, immediately seek
emergency medical attention. Do not try to
treat the injury yourself
• Use only genuine factory parts for repair
• Do not smoke when using / near the pump
• Do not use the pump near a source of spark /
open flames etc.
• Do not use with:
Corrosive media, solvents, acids, alkalis etc
FEATURES
• Geared Rotary barrel pump with 3 times dis-
charge per rotation. For every complete handle
turn, the rotor turns 3 times
• Dual directional Operation allows the pump
to both empty, as well as refill containers
• Compact design, Ideal for use where volume
fuel dispensing is needed, such as construction
sites, workshop, aviation, farms/ ranches, boat
etc.
• Professional Die Cast Aluminum construction
with Die Cast Zinc rotor & vanes.
• Non wearing sintered gears.
• Crank Shaft mounted on ball bearings.
• Die Cast Aluminum handle with security loc-
king latch.
• Horizontal Discharge outlet (easily connects
to a Fuel Filter).
• Fits 15 to 55 gallon (50 - 205 liter) drums.
• Dispenses 10 liters (2.60 gl.) per 20 turns.
Intended use with:
Gasoline, Diesel, Kerosene etc. Works with
most petroleum based media & lubricating oils
upto SAE 90.
Wetted components:
Steel, Aluminum, Zinc, NBR, PVC Nitrile **, Po-
lyacetal***
**on models with hose.
*** On models with non-return at inlet of suc-
tion tube.
OPERATION INSTRUCTIONS
KNOW YOUR TOOL
Before taking this product, familiarize yourself
with all operating features and safety require-
ments.
1. PUMP BODY.
2. PUMP OUTLET.
3.DISCHARGE SPOUT.
4. SPRING GUARD.
5. GEAR BOX.
6. NOZZLE HOLDER.
7. CRANK.
8. PUMP HANDLE.
9.DISCHARGE NOZZLE.
6