MetalTech Jobsite I-IDS1830 Directivas De Seguridad E Instrucciones De Montaje

AND ASSEMBLY INSTRUCTIONS
1
YEAR
WARRANTY
OPERATIONAL SAFETY
WARNING!
READ ALL INSTRUCTIONS, WARNINGS IN THIS MAN-
UAL AND LABELS ON THE PRODUCT BEFORE USING
STILTS. IT IS YOUR RESPONSIBILITY TO READ,
UNDERSTAND AND FOLLOW THESE INSTRUCTIONS.
This manual gives imperative information on appropriate
operations and maintenance. Each exertion has been made to
guarantee the precision of this manual. These guidelines are
not intended to cover each conceivable condition and
circumstance that may happen. We reserve the right to change
this product at any time without prior notice.
IT IS VITAL THAT STILTS BE ASSEMBLED PROPERLY AND
ADJUSTED ACCORDING TO PERSONAL SIZE AND PREFER-
ENCE. ADDITIONALLY, IT IS CRITICAL TO PROPERLY KEEP
UP THE GOOD CONDITION OF YOUR STILTS AND TO FULLY
EXAMINE YOUR STILTS BEFORE EVERY USE, ENSURING ALL
FASTENERS; BOLTS, NUTS, WING NUTS AND SCREWS ARE
TIGHT. IT IS YOUR RESPONSIBILITY TO READ, UNDERSTAND
AND FOLLOW THESE INSTRUCTIONS, AND TO ALWAYS
PRACTICE CAUTION UTILIZING STILTS. STILTS OUGHT TO BE
USED ONLY IF WORKING ON A LEVEL FLOOR, CLEAR OF ANY
OBSTRUCTIONS OR DEBRIS.
IF THERE'S ANY QUESTION ABOUT CONDITIONS BEING
SAFE OR UNSAFE, DON'T USE THIS PRODUCT!
THE STILTS ARE FOR PROFESSIONAL USE ONLY!
WE WILL NOT BE HELD RESPONSIBLE FOR ANY ACCIDENT
RESULTING FROM IMPROPER USE, IRRESPONSIBLE USE, OR
FAILURE TO INSPECT AND ADEQUATELY MAINTAIN ACCORD-
INGLY. THIS IS THE SOLE RESPONSIBILITY OF THE USER.
BROKEN OR MISSING PARTS?
DO NOT RETURN THE PRODUCT TO THE RETAILER FROM
WHICH IT WAS PURCHASED – PLEASE CONTACT OUR
CONSUMER SERVICE DEPARTMENT.
If you experience a problem, have any questions concerning
the assembly or use of this product or need replacement
parts, please contact our customer service:
1 800 363-7587 / 450-681-6440 / [email protected]
MODELS:
I-IDS1830
I-IDS1830QP
I-IDS2440
Picture may differ from actual product