Enlaces rápidos
RVM-PROJM1
Projector Mount with Micro Adjustments
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
!
CAUTION:
THE MAXIMUM LOADING
WEIGHT IS 40LBS. USE WITH PRODUCTS
HEAVIER THAN THE MAXIMUM WEIGHT
INDICATED MAY RESULT IN INSTABILITY AND
POSSIBLE PERSONAL INJURY.
Projector Mount
Max weight: 40 lbs
V1
P1
Manuales relacionados para Rapid video mounts RVM-PROJM1
Resumen de contenidos para Rapid video mounts RVM-PROJM1
- Página 1 RVM-PROJM1 Projector Mount with Micro Adjustments INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS CAUTION: THE MAXIMUM LOADING WEIGHT IS 40LBS. USE WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHT INDICATED MAY RESULT IN INSTABILITY AND POSSIBLE PERSONAL INJURY. Projector Mount Max weight: 40 lbs...
- Página 2 RAPID VIDEO MOUNTS no ofrece ninguna garantía, ni expresa ni implícita, respecto de la información aquí incluida. RAPID VIDEO MOUNTS no se responsabiliza de la precisión de la información provista en este documento, ni tampoco de que sea completa o suficiente.
- Página 3 SYMBOLS 150lbs Socket Wrench Caution Tighten Pencil Mark Screwdriver Drill Level Heavy! Llave española Precaución Ajustar Marque con lápiz MW150F64 Destornillador Agujerear Nivel Tres Lourd! Clé ouverte Attention Serrer Marque de crayon Tournevis Percer Niveau !Pesado! HARDWARE PRODUCT NUMBERS Leg post Leg post Leg post Leg post...
- Página 4 STEP 1- REMOVE THE CEILING PLATE AND THE COVER STEP 2- REMOVE THE PROJECTOR PLATE Remove the phillips screw and save it...
- Página 5 STEP 3- FIND STUD AND MARK EDGE AND CENTER LOCATIONS STEP 4- DRILL PILOT HOLE AND MOUNT CEILING PLATE Wood Pilot Hole Pilot Hole Size Pilot Hole Depth 7/32” inch 2.75 inch 5.5 mm 70 mm...
- Página 6 STEP 5- ATTACH THE ARTICULATION UNIT AT THE CEILING PLATE STEP 5A- ATTACH THE ARTCULATION UNIT AT THE CEILING PLATE DROP CEILING INSTALLATION Tighten the set screw to fix the mount IMPORTANT! TIGHTEN UNTIL SNUG MINIMUM 2 TURN ENGAGEMENT STEP 5A- ATTACH THE ARTCULATION UNIT AT THE CEILING PLATE STEP 6- ATTACH THE PROJECTOR LEGS AT THE PROJECTOR PLATE STEP 7- ATTACH THE PROJECTOR TO THE MOUNT Choose the proper leg posts and...
- Página 7 STEP 7- ATTACH THE PROJECTOR AT THE MOUNT Secure the projector legs to the leg posts, then attach the plastic leg post covers to the leg posts. STEP 8- LIFT AND HANG THE PROJECTOR Secure the projector plate Raise the handle to to the articulation unit adjust the projector’s with the screw moved...
- Página 8 Esta garantía se aplica a los residentes de los Estados Unidos que realizaron la compra en un distribuidor autorizado de RAPID VIDEO MOUNTS. Esta garantía cubre los productos RAPID VIDEO MOUNTS de los defectos de materiales y de mano de obra por un periodo de 5 años. RAPID VIDEO MOUNTS, a su exclusivo criterio, reparará o reemplazará...