Idiomas disponibles
Idiomas disponibles
14. Security
The Master Mill 500 is equipped with two devices that guarantee the safety of the operator at all times. One of them
is used to detect if the main body door is closed and the other one, to detect if the lower collection tank is correctly
assembled.
The two safety devices are coded magnetic actuators. When the door is closed and the collection tank is correctly as-
sembled, the two components of each actuator come into contact and the machine is allowed to start. The moment
either of the two elements is opened, the two parts of the actuator are no longer in contact and the machine automa-
tically shuts down. In this case, the machine must be reset to resume its use, see section 11.6.
15. Maintenance
15.1. General features
Before performing maintenance on the equipment, it is imperative that you read and understand
the instructions in this manual. Failure to comply with all of them can cause serious damage and
Maintenance work must always be carried out with the equipment stopped and with the electrical
current disconnected. Always use protective gloves for maintenance operations.
If you have any questions not covered in this manual, contact the technical service
32
¡IMPORTANT!
injury to users and the equipment.
¡IMPORTANT!
¡IMPORTANT!
MASTER PRODUCTS to request technical assistance.
www.masterproducts.es
