Idiomas disponibles
Idiomas disponibles
During wall-hanging installation, keep the installation height from the ground
greater than 15 cm. Hanging-type heater shall be no less than 50 cm away
from the ceiling.
III． Operation notice
Make sure the heater shell, line and power plug are intact.
Check the rated voltage in the model label of the heater is in line with
that of the outlet. Power outlet requirements are: voltage 220V,
frequency 50Hz, bearing current ≥ 10A. Do not power the heater on until
the requirements are met.
Turn the temperature control knob clockwise to the end, press the level-I
power switch to switch on the low-level heating, or the level-II switch for the
high-level heating. If both levels are switched on, the machine will be working
on the maximum power.
The product is for household use only.
User's Manual
Temperature
Control
Switch
13
E N
