Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
y
Ensure the unit is unplugged and empty.
y
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that
it will not slip during the door reversing process.
y
All parts removed must be saved to do the reinstallation of the door.
y
Do not lay the unit flat as this may damage the coolant system.
y
It s better that 2 people handle the unit during assembly
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge of freezer door. Then remove the door and
place it on a soft pad to avoid scratch.
7
unscrew
