Section 3 - mydlink
1
Device Name
2
Privacy Mode
3
Motion and Person Detection
4
Point to Go
5
Auto Home
6
Siren Timeout
7
Storage
8
Camera Microphone
9
Color Night Vision
10
Anti-Flicker
11
Pan-Tilt Control
12
Status LED
13
Designated Contact
14
Wi-Fi
15
Time Zone
16
Firmware
17
MAC ID
18
Restart Device
19
Remove Device
D-Link DCS-8635LH User Manual
Tap to change the device's name.
Tap to enable. Privacy mode will disable the camera feed.
Tap to set the Motion and Person Detection area and sensitivity settings.
This photo is what you will see when you control your viewpoint in the camera's Point to Go
live-view. Tap Rescan to scan a new panorama.
Enable to automatically return your camera to the set 'Home Point' after 60 seconds of
inactivity.
Set the auto-off timer for the siren. This setting will apply to manual operation and
Automations.
Tap to change the video clips storage location from the microSD card to the cloud. You can
also subscribe to mydlink Cloud from here and view your current subscription plan.
Tap to enable or disable picking up sound near your camera in live view and recordings.
Tap to change night vision detection to On, Off or Auto. Color Night Vision is enabled by
default and allows you to see color images while viewing the live feed in low
light scenarios.
Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the frequency of your lights.
Choose whether to control your camera's Point to Go live-view pan-tilt control by swiping
or tapping.
Disabling this will turn off the LED until you turn it back on.
Tap here to add, remove, or edit designated contacts that appear in the rich notification.
Tap to see the current wireless network. Note: Tap Remove Device or
press the reset button if you want to change wireless networks.
Select the time zone to calibrate your device to.
This displays the installed version of the firmware on your device. Tap to enter the update
settings. You can choose the most suitable time for automatic updates.
Identifies the device for support issues.
Tap this button to restart the device
Tap this button to disconnect this device from your mydlink account.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
17
