Idiomas disponibles
Idiomas disponibles
• If the meter is not to be used for a long time, take out the batteries.
• In case the meter is polluted due to battery leak, the meter should be sent by
post to the manufacturer for cleaning and checking.
• For disposal of used batteries, follow existing specifications on battery recy-
cling, reuse and treatment.
8.4 Calibration Interval
In order to ensure the accuracy of the meter, periodic calibration should be
performed by our debugging personnel. It is recommended to make calibration
every year. If the meter is in frequent use or used in poor environments, the
calibration interval should be accordingly shorten. If the meter is less used, the
calibration interval may prolong to three years.
9.
TABLE OF REFERENCE FOR STANDARD LIGHTING OF
DIFFERENT PLACES
The value of the illuminance in Fc can be obtained by dividing the ilumination
value in lux by 10.6.
Learning centers:
Iluminance (Lux)
1500~300
750~200
300~150
150~75
75~30
KPS-LX20 • Digital light meter
Places
Drafting room, sewing room, computer room
Classroom, laboratory, workshop practices, research
room, reading room, archive, office, staff room, confer-
ence room, nursing, restaurant, kitchen, pantry, radio
room, printing room, switchboard, security room, in-
door sports court
Large classroom, auditorium, storage room, hall, stairs
Corridor, elevator hall, toilet, room service, workers
room, bridge, outdoor playgroundr
Cellar, garage, fire escape
42
