Enlaces rápidos
Weight Limit: 500 Lb / 227 Kg
KT. - 2019/1/29
© 2014 Dorel Home Products All Rights Reserved
Thank you for purchasing from DHP!
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
4356939N
Upholstered Bed
Queen
Light Green Linen
Lot Number
B344356939N00
1
Manuales relacionados para DHP 4356939N
Resumen de contenidos para DHP 4356939N
- Página 1 4356939N Upholstered Bed Queen Light Green Linen Thank you for purchasing from DHP! Weight Limit: 500 Lb / 227 Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
- Página 2 Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
- Página 3 Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Before you throw the package, please use the Side Panel Side Panel T970000 T970010 T970020 T970030 Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
- Página 4 Hardware Pack Hardware Pack #: T4135439N-01 1/4" X 3/4" X 40 1/4" X 1 3/16" X 12 1/4" X 1 9/16" X 18 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
- Página 5 Step 1 Attach Z X 4 to A and B with Screw into A and B as illustrated. Leg tip slants towards outside. Do not completely tighten the BOLTS , leave half of the thread exposed. To avoid fraying the fabric during assembly, please lay A and B on a piece of cardboard.
- Página 6 Step 2 Attach E&F to C&D with Repeat the same step for remaining parts C/D/E/F. Slat holes towards upside! The holes shown in circle are located on the lower side. X 16...
- Página 7 Step 3 Attach S to D and T to C with Repeat the same step for the other subassembly C & D. Pay special attention that small holes on slots of S and T should be facing upward! X 12...
- Página 8 Step 4 Hang C & D on A & B as illustrated, don't completely tighten the bolts until STEP 7 is complete.
- Página 9 Step 5 Attach L X 2 to K with...
- Página 10 Step 6 Attach sub-assembly K/L from previous step to C and D with...
- Página 11 Step 7 7.1 Attach I x 2 to A and B with 7.2 Attach I x 2 to K with , then properly tighten all the bolts.
- Página 12 Step 8 8.1 Insert O1 into X; 8.2 Press X into E&F, repeat the same procedure for the opposite side of the bed with another O1&X on E&F. 8.3 Insert ends of both slats O1 into Y, then press Y into I as illustrated. Repeat the same procedure going backwards for every row of slats.
- Página 13 ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
- Página 14 ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su DHP garantiza que este producto está libre de defectos de fábrica en la mano de obra piso y su producto.
- Página 15 Partes Instrucciones Paso 1 Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Una Z X 4 con A&B con Todo se incluye en 1 caja grande! Perno con A&B. Paso2 Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para Una E&F con C&D con los .
- Página 16 ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
- Página 17 ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le DHP garantit que ce produit est exempt de tout vice de matériaux et de fabrication et plancher et le produit.
- Página 18 Pièces Instructions Étape 1 Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts Attacher Z X 4 à A&B avec Tout dans 1 grosse boîte! à A&B. Étape 2 Il y a des boîtes intérieures qui contiennent les composants pour completer Attacher E&F à C,D avec .
- Página 19 ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.