Coding AUDI A6 / ALLROAD QUATTRO
Please note:
The procedure described below for encoding and enabling the
trailer mode only serves for a general orientation and can vary
greatly depending on the model (motorisation / equipment). If
necessary further control units will have to be adapted by means
of guided trouble-shooting (e.g. motor electronics, distance
control ACC).
Encoding the ESP control unit:
• Guided troubleshooting
• Skip
• Function / component selection
• Chassis
• Brake system
• Self-diagnosing systems
• 03 - ABS and ESP
• J104 control unit for ABS and ESP
• Encode control unit (encode trailer coupling as installed)
30
/
87010984/15.01.2018
PFJones ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- [email protected] web- www.pfjones.co.uk
Set up trailer operation
Match the vehicle code in the following control units
via selected diagnostics by coding "towing hitch
installed" (see additional coding example):
· 19 Diagnosis interface for data bus
· 45 Brake electronics ESP
· 13 Distance control ACC
· 34 Level control
· 01 Engine control unit
· 76 Park distance control
Set up trailer operation
Encoding vehicles with ride-control system (e.g. Allroad Quattro):
• Vehicle self-diagnosis
• Gateway installation list
• 34 - Ride-control system
• 07 - Encode control unit
• Add the value 10 the current code & re-program
Encoding vehicles with PDC :
• Vehicle self-diagnosis
• Gateway installation list
• 76 - PDC
• 07 - Encode control unit
• Add the value 10000 the current code & re-program
Encoding the diagnosis interface for the data bus:
• Vehicle self-diagnosis
• Gateway installation list
• 19 - Diagnosis interface for the data bus
• Read / write long code
• 69 - Trailer function (switch to encoded!)
12/14
