Idiomas disponibles
Idiomas disponibles
Preparing
• When the TV is turned on for the first time after being shipped
from the factory, initialization of the TV may take approximately
one minute.
• Image shown may differ from your TV.
• Your TV's OSD (On Screen Display) may differ slightly from that
shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
• The items supplied with your product may vary depending upon
the model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 8 mm (0.31 inches) thick, 18 mm (0.7 inches)
width and 8 mm (0.31 inches) a wire diameter. (Depending upon
model)
• Use an extension cable that supports
USB flash drive does not fit into your TV's USB port.
C
B
B
A
A
• Use a certified cable with the HDMI logo attached. If you do not use
a certified HDMI cable, the screen may not display or a connection
error may occur.
• Recommended HDMI cable types (3 m (9.84 feet) or less)
- Ultra High Speed HDMI
®
/™ cable
if the USB cable or
<
* A
8 mm (0.31 inches)
=
<
* B
18 mm (0.7 inches)
=
<
* C
8 mm (0.31 inches)
=
Optional Extras
Optional extras can be changed or modified for quality improvement
without any notification. Contact your dealer for buying these items.
These devices work only with certain models. The model name or
design may be changed due to the manufacturer's circumstances or
policies.
Magic Remote Control
MR20GA
Check whether your TV model supports Bluetooth in the Wireless
Module Specification to verify whether it can be used with the Magic
Remote.
Wall Mounting Bracket
(Depending upon model)
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
Model
65/75NANO99*
Screws distance (A) (mm)
180
Standard screw
M6
Number of screws
2
Wall mount bracket
WB20GB
B
65NANO95*
Model
65NANO97*
65/75NANO99*
VESA (A x B) (mm)
400 x 400
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW440B
A
A
75NANO95*
75NANO97*
600 x 400
M8
4
LSW640B
5
