Winston Porter ANDV3354 Instrucciones De Ensamblaje página 10

STEP 5
1. Attach top board (1) to pre-assembled unit by inserting cam bolts (A) into cam lock holes
and inserting wood dowels (C) into wood dowel holes on left side panel (2) and right side
panel (3).
2. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3),
then rotate clockwise to secure cam bolts in place.
STEP 6
1. Attach upper back board (11) and middle back board (12) to back of cabinet by inserting 20
screws (M) through holes on upper back board (11) and middle back board (12), then
tighten to back of cabinet.