Thank you for choosing our brand...
-We will start our assembly with the assembly process of our drawer cases.
-Let's complete the installation of our part 9 with the minifix between our parts 8
and 10, with the channels in the same direction.
-Let's fix our part 7 with the help of dowel pins and minifix from the points shown
to our part 9.
-Let's pass the backing material 11 through the channels of our parts 8 and 10
from the part 11 to the part 9 of the part.
-Let's assemble my handles with the help of 35 * 18 screws from the points shown
on our front drawer of drawer.
-Let's assemble the carrier parts of our drawer rails with the help of 35 * 18 screws
from the points shown in our parts 2 and 3, provided that the screws are upright.
-- Let's lay our part 1 on the ground so that the holes of the minifix remain on the
bottom side.
-Let's mount our metal legs to the points shown with the help of 35 * 18 screws.
-Let's assemble our parts 2 and 3 respectively in the points shown in our part 1.
-Let's place our backing material 4 in the channel of our part 1 between our parts 2
and 3.
-Let us assemble the top of our parts 2 and 3, minifix by paying attention to the
upper table 5, respectively.
-After assembly, we can clean our cabinet with a slightly damp cloth. After
checking all the minifix we can assemble the minifix covers.
-In order for our drawers to work comfortably and quietly, please make sure that
the screws we attach to our parts 3 and 4 are assembled according to the manual.
for support +1(800)668-6944/ www.vanitysale.com
14
