ALFRA TML 100 Manual De Instrucciones página 18

Example: You would like to lift a plateof S235 which is 6 mm thick. The plate stands vertically in your shelf (i.e. at
an angle of 90°) and your magnet is ideally positioned, as shown in figure 1.
Material thickness:
Material:
Alignment of the load: 90° tilted; load swivel facing upwards
Maximum load weight with 3:1 safety factor= 100 kg x 100 % x 30 % = 30 kg
6 mm  max. load-bearing capacity at 0° = 100kg (see table 2, page 21)
S235 holding force, subject to material = 100 % (see table 1, page 18)
Load-figure corresponding to direction = 30 %
18