Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Turn OFF power to work area at main circuit breaker or fuse box.
CAUTION: Do not rely on wall switch alone to turn off power.
2. Remove the crossbar from the fixture by unscrewing the
pre-assembled long mounting screw.
3. Attach crossbar to junction box (not included) with the two
crossbar screws (AA).
Hardware Used
AA
Crossbar Screw
4. Connect ground wire from the outlet box to the ground wire from
the light (A) by twisting a wire nut (BB) onto bare ends of the
wires. Connect white wire from the outlet box to the white wire
from the light (A) by twisting a wire nut (BB) onto bare ends of
the wires.
Connect the black wire from the outlet box to the
black wire from the light (A) by twisting a wire nut (BB) onto the
bare ends of the wires.
Note: The ground wire is green.
Hardware Used
Wire Nut
BB
x 2
x 3
4
1
2
3
4
