Front Runner FAVT002 Manual De Instrucciones página 3

2 FIT AND SECURE
2.1
2.2
2.3
FAVT002_REV_A02
If you are installing a Full Rack remove all
the OEM Plastic Button Head Bolts, but if
you are installing a Half Rack remove the
rear Bolts (3, 4 & 5) on the left and right
hand side of the vehicle.
Use a 4mm Hex Allen Key to remove the
above identified Bolts from the roof
channel.
Clean the area around each of the
threaded mounting pints and apply a
bead of silicone on and around each
point. Place a Spacer (Item 11) over each
of the mounting points.
3
13mm
© 2019 FRONT RUNNER VEHICLE OUTFITTERS