Idiomas disponibles
Idiomas disponibles
Before Operating
Before operating your new oven, read and understand
this operation manual completely.
Before the oven can be used, follow these steps:
1. Place the drip tray correctly. See page 10.
2. Close the door. Plug in the oven. Check that the display
lights.
3. Follow directions below to clean the oven before first
use.
New Oven Clean - Before First Use
The steam generator heats the water which is used for
cooking. It should be cleaned before the first use to get
rid of any odor in the oven cavity. Clean the oven with
New Oven Clean in manual operation for 20 minutes
without preheat and food. You may notice some smoke
and odor during this process. This is normal. The oven is
not out of order.
PREPARATION
1. Ventilate the room.
2. Fill the reservoir with fresh cold tap water and install.
3. Install the empty drip tray.
CLEAR
Press the CLEAR pad to:
1. Return to Home Page.
2. Cancel a program during cooking.
BACK
Press BACK if you want to go back to the previous page
during programming before pressing START.
pressing START, it is not possible to return to a previous
page.
TO CLEAN THE OVEN BEFORE
USE, FOLLOW THESE STEPS.
1. Select CLEAN from the home page.
2. Select NEW OVEN CLEAN from the list provided.
3. Insert all accessories (i.e. two trays, two racks) into
the oven.
4. Fill the reservoir with fresh cold water. Replace
reservoir and press START.
5. Once NEW OVEN CLEAN is complete, use caution
in opening the oven.
WARNING
1. The oven d oor, outer cabinet and oven cavity will
become hot.
2. Do not open the oven with your face close to the oven.
Steam from the oven may cause burns.
11
11
11
11
After
E
E
E E E
