Idiomas disponibles
Idiomas disponibles
Installation (continued)
- Secure the drain body (1) to the sink with
the bottom gasket (3), plastic washer (4),
and retaining nut (5) from below the sink.
- Tighten the retaining nut (5) by hand
until it is snug, then tighten it securely
using a wrench .
- Insert the pipe flange (6) into the flange-
end of the tailpipe (7) then secure the
tailpipe to the drain body (1) using the
connecting nut (8). Tighten the connecting
nut (8) until it is snug. Do not over-tighten.
Please contact [email protected] or 1-877-333-0098 for further assistance.
Bottom Gasket (3)
Plastic Washer (4)
Retaining Nut (5)
Pipe Flange (6)
Tailpipe (7)
Connecting Nut (8)
7
Drain Body (1)
Fig. 5
Drain Body (1)
Fig. 6
CONGLOMKB.COM
