Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FLASHING LIGHT
When the unit is on, there will be blue light around the speaker to flash along
with the music rhythm. To disable the disco light, press the LIGHT button on
unit until the display shows "OFF".
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION button until the display
reads FM and the radio frequency.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by press the
The station frequency is shown on the display.
To tune to a preset station:
• To tune to the next preset station, press the FOLDER/10/M. + button.
• To tune to the previous preset, press the FOLDER/10/M. - button.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory
automatically, press and hold the PLAY/PAUSE/PAIR/SCAN button. After the
unit is finished scanning, the unit will automatically tune to preset number 1
(P01).
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning
automatically.
1. Use the
/TUN.+ or
I
save as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. "P01 " will flash on the display to indicate
that you are saving the station as Preset Memory 01. (To change the preset
memory number, press the FOLDER/10/M. + or FOLDER/10/M. - buttons.)
3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is now set
to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM
stations
EN
/TUN.+ or
I
/TUN.- button to tune to the station that you want to
I
14
/TUN.- button.
I
Tabla de contenido
