Troubleshooting; Technical Data - OK. OPJ 4321 Manual De Instrucciones

Size = A5
EN

TROUBLESHOOTING

If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem
Problem Possible causes
Solution
The motor stops while juicing or
it turns noticeably slow
The juice sprays out of the
product
During the processing, the juice
is running down the product
base

TECHNICAL DATA

Rated voltage
Rated power
Protection class : II
DISPOSAL
Do not dispose of this product as unsorted municipal waste. Return it to a designated collection
point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the
environment. Contact your retailer or local authorities for more information.
IM_OPJ4321_181029_V07_HR.indb 14
Possible causes
• Interrupted power supply
• Product is switched off
• The locking bar is not secured
• The sieve is blocked
• You are working too fast
• The speed setting is too high
• The sieve or the spout is
blocked
• The speed setting is too high
: 220 - 240 V~, 50/60 Hz
: 1000 W
14
Solution
• Interrupted power supply
• Product is switched off
• The locking bar is not secured
• Switch off the product and
unplug. Clean the sieve.
• Work more slowly
• Change to a lower speed
setting
• Clean the sieve and spout
• Change to a lower setting
29/10/18 10:43 am