tomado TVC0501W Instrucciones De Uso página 17

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Attention
• Only use the vacuum cleaner when all filters have been placed. If not, the suction power could be reduced or the motor
could be damaged.
• Torn or not properly sealing filters could damage the motor. When a filter is defective, it must be replaced by a new
original filter.
CLEANING THE TURBO BRUSH
Hair and/or other dirt can remain in the rotating brush. Therefore, regularly clean the turbo brush for an optimum use of the
vacuum cleaner.
• Make sure the vacuum cleaner is off and disconnect the turbo brush from the vacuum cleaner.
• Unlock the catch at the bottom of the turbo brush with a coin or flat screwdriver - fig. 10.
• Fold out the catch - fig. 11.
• Now carefully pull the brush out of the turbo brush - fig. 12.
• Carefully cut the entangled threads or hairs from the brush.
• Clean the brush with lukewarm running water and allow the brush to dry in the air.
• Place the brush back in the turbo brush.
• Fold in the catch and rotate it to the locked position with a coin or flat screwdriver.
After each use, place the vacuum cleaner back on the suspension bracket. Once the adapter is connected and the connector
is inserted into the connection of the vacuum cleaner, the battery will charge. Once the battery is fully charged, remove the
adapter from the socket and the appliance.
ATTACHING THE SUSPENSION BRACKET
Use screws and plugs to attach the suspension bracket to the wall on a location near a socket for the adapter.
• Hold the suspension bracket with the round below against the wall at the required position.
• Demarcate the two screw holes on the wall using a pencil.
• Use a drill to make two holes of at least 4 cm deep on the marks.
• Insert the plugs in the holes.
• Place the suspension bracket on the wall and fasten it with the screws.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collection of electric and electronic products.
Correct disposal of the product prevents negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
STORAGE
RECYCLING
EN - 17
loading