Idiomas disponibles
Idiomas disponibles
1
1. Remove the cap on the back of the housing.
2. Use a screwdriver to remove the screw.
3. Remove upper housing cover.
4. After removing the upper housing cover, loosen the three screws fixing the upper grinding
gear with a screwdriver and then remove the upper grinding gear.
5. Clean this grinding gear and the other internal parts with a brush or dry cloth. If necessary,
use a hoover to remove any remaining coffee powder.
6. After cleaning, replace the upper grinding gear, retighten the three screws from the upper
grinding gear with a screwdriver and then close the housing with the upper housing cover.
7. Tighten the screw on the housing with a screwdriver and put on the cap.
Note:
You can grind suitable cleaning tablets to clean the lower grinder.
IMPORTANT!
If you notice a change in the grinding results during the life of the appliance, this may be an
indication of wear on the grinding discs.
Check the grinding discs for wear every 250 kg of coffee and, if necessary, have them re-
placed with original spare parts by a specialist or by Graef customer service.
TWO-YEAR WARRANTY
As from the date of purchase we assume manufacturer warranty of twenty four months for
defects which can be traced back to manufacturing and material defect. Your legal warranty
claim in conformity with Section 437 et seq. of the German Civil Code (BGB) shall remain
unaffected by this regulation. The warranty does not cover any damage which is caused by
incorrect handling or use as well as defects which only slightly influence the function or the value
of the unit. Moreover, transport damage insofar we are not responsible shall be excluded from
the claims under guarantee. Warranty shall be ruled out for damage, the repair of which has
not been carried out by us or one of our representations. In case of justified complaints, we shall
repair the defective product or replace it by a product without defects at our discretion.
3
4
DE
EN
FR
NL
IT
ES
DK
SE
NO
PL
HU
UKR
25
