Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Remove the preassembled lock nut (D) and
washers (B & C) from the new faucet (A).
□
WITH FLANGE: Place the faucet (A) through the
mounting holes in the sink until the faucet (A)
sets on top of the sink.
□
WITH DECK PLATE: Align the hole in the
gasket (F) and deck plate (E) with the mounting
hole in the sink. Place the faucet (A) through
the deck plate (E) and mounting hole in the sink
until the faucet (A) sets on top of deck plate (E).
NOTE: A silicone is required under the gasket (F).
A
A
E
F
4
2
Securing the faucet
□
From underneath sink, secure the faucet
assembly (A) with the rubber washer (B),
metal washer (C) and nut (D). Use the wrench
to tighten the nut (D).
1
D
B
C
D
