Idiomas disponibles
Idiomas disponibles
OPERATION
CAUTION: ALWAYS USE FOOD PLATEAU SUPPORT AND FOOD PUSHER
1. Plug into 220-230VAC50Hz outlet.
2. Place food to be sliced on the sliding feed table and press the piece holder
against thickness guide. Then pull the sliding feed table against the blade by
hand.
3. The maximum size of food is:110x110x90(mm)(length x width x thick).
4. Switch on the appliance.
5. When the blade is rotating, push the sliding feed table toward blade. Move tray
back and forth steadily. Keep food gently pressed against guide for even slicer.
6. Do not operate the machine more than 10 minutes. The motor may be overheat.
Turn off switch & let it rest for at least 30 minutes to cool down the motor.
7. During slicing, if the rotational speed of blade reduces, let food unfreezes for a
while, then slice again.
8. When finishing slicing, unplug unit. For safety and blade protection when
storing, turn thickness adjusting knob to align thickness guide with blade.
CLEANING
UNPLUG SLICER FROM OUTLET
All slicing parts remove for thorough cleaning. Wash with a soft cloth or sponge and
a mild soap or a spray cleaner. Rinse and dry.
18
